Page 1 of 1
Got me a Metz 48 Flash.... advice and tutorials?
Posted: Tue May 03, 2011 11:52 am
by NeilOffkey75
I have recently bought a flash from the wonderful member Scooterman and I am over the moon with it. The only thing now is a resource for advice or tutorials on how to get the best from my new flash.
I am a complete newbie when it comes to flash photography, so any advice or links to sites that can help for beginners I would be greatly appreciated.
Re: Got me a Metz 48 Flash.... advice and tutorials?
Posted: Wed May 04, 2011 7:34 am
by KevinBarrett
Re: Got me a Metz 48 Flash.... advice and tutorials?
Posted: Thu Jun 16, 2011 11:58 am
by NeilOffkey75
Help again!! This all seems to relate to off camera flash where I wont be doing this due to the Metz being attached to my camera. I just want to be able to grasp the basics of using manual flash settings and ttl as my head is about to explode due to each time I attempt a shot using my flash it looks massively over exposed or down right awful.
Re: Got me a Metz 48 Flash.... advice and tutorials?
Posted: Thu Jun 16, 2011 1:18 pm
by Greg Beetham
Usually I would suspect some kind of hotshoe contact problem or maybe a lens diaphragm that's sticky when bad direct flash exposures happen repeatedly. The lenses I see in your lens list would seen to preclude a sticky diaphragm as they are all newish, so that leaves the contacts as a possible culprit, even a lens contact can be a possible cause perhaps. Camera settings might be worth checking to make sure there is nothing outlandish like a high ISO being set for example. Maybe try Auto ISO A mode or Auto ISO P mode on various subjects and distances just to see how that goes.
Greg
Re: Got me a Metz 48 Flash.... advice and tutorials?
Posted: Thu Jun 16, 2011 1:52 pm
by NeilOffkey75
Greg Beetham wrote:Usually I would suspect some kind of hotshoe contact problem or maybe a lens diaphragm that's sticky when bad direct flash exposures happen repeatedly. The lenses I see in your lens list would seen to preclude a sticky diaphragm as they are all newish, so that leaves the contacts as a possible culprit, even a lens contact can be a possible cause perhaps. Camera settings might be worth checking to make sure there is nothing outlandish like a high ISO being set for example. Maybe try Auto ISO A mode or Auto ISO P mode on various subjects and distances just to see how that goes.
Greg
Hi Greg, I dont think there is an issue with the flash itself, I believe its me trying to grasp the basics of flash. Currently looking for a book to read regarding the subject.