Need help with flash basics

Cabled, wireless, studio - anything do with using flash
Posts: 12
Joined: Thu May 17, 2012 1:04 am

Need help with flash basics

Unread postby olgafox2002 » Sun Jul 21, 2013 3:15 pm

1)In manual mode, the manual says:"when the shutter button pressed half way down, the distance at which the proper exposure is obtained appears on the LCD panel. Now what does the following mean? " Set the aperture to match the displayed distance to the shooting distance." To adjust what aperture? On the camera?
2) "The power level range eg. 1/1 -1/2 corresponds to the aperture range, f4-5.6" What does that mean?

Posts: 210
Joined: Wed Jun 25, 2008 2:25 pm
Location: Scotland

Re: Need help with flash basics

Unread postby harvey » Sun Jul 21, 2013 10:28 pm

If you know the power of your flash (expressed as a guide number), the ISO of the film/sensor and the flash to subject distance then you can calculate an aperture to use.

You can find one explanation here.

Return to “Flash”

Who is online

Users browsing this forum: No registered users and 3 guests