Page 1 of 1

New IR Rig

Posted: Tue Jun 29, 2010 10:13 am
by Birma
I have been flirting with IR photography on and off this year, ever since seeing John's IR shots here. While searching around the net for stuff on IR (how did we research anything before google?) I came across an article about using a Sony DSC-V1, with its in-built IR function. I still own this camera (purchased despite DPR's review :D ) and I had completely forgotten this function. Here is link to the info I found.

http://www.dailytechlog.com/tech-talk/i ... sc-v1.html

I already had most of what I needed, I just had to get a step up ring for 52 - 77 mm. Here is a quick shot out of the window this morning. (No PP other than re-sizing, and sharpening for the web.)

Image

The down side is that the V1 limits you to 1/30 sec at f2.8 so you need to filter out a lot of light to stop everything blowing out. (It was meant to be for extreme low-light / night time shots.) This limit is still really annoying - added as there was a fear the camera would be used to photograph through people's clothes! I think the Sony F828 and 717 (?) may have had this function as well. May be the V3 (Yildiz?) as well. I also wish the V1 had an option for RAW, but that is another story!

Here are some picture of the new 'rig'.

Image

Image

These show the V1 with (chinese copy) extension tubes which were originally for using either a telephoto or wide angle add on lens. Next is the step up ring, and then a B&W ND 64x filter, Kood square filter with adapter, containing a Cokin P007 IR filter.

So, what have I gained? Well, I have got to dust off the V1 again, and I can at least hand hold IR shots at 1/30sec (rather than 30secs using the dslr). I can also do some IR shots for Henry's "small sensor thread" 8) . (The V1 has an OVF as well!)

Re: New IR Rig

Posted: Tue Jun 29, 2010 4:14 pm
by KevinBarrett
Nice set-up! I can't wait to see what you do with it. And what do you see through the OVF with that filter attachment on the front?

Re: New IR Rig

Posted: Tue Jun 29, 2010 5:04 pm
by Birma
KevinBarrett wrote:And what do you see through the OVF with that filter attachment on the front?
:D Hehehe - good point - the square filter holder does compromise the ovf, just ever so slightly ;). If I really like the set up I may buy 52 mm circular filters.

Re: New IR Rig

Posted: Wed Jun 30, 2010 8:49 pm
by Juanito200
Great shot Birma, and coming from something you already have... You can't beat that! I can't wait to see more. John

Re: New IR Rig

Posted: Mon Jul 05, 2010 9:12 pm
by Dr. Harout
I like the shot, though it's with a bit of greenish tint (adjustable with PP)