Page 1 of 1
SAL-50M28 Rattles
Posted: Wed Aug 12, 2009 10:20 pm
by SLUFDRIVER
I bought a Sony 50 f2.8 macro back around the end of May and for some reason, it rattles. When focusing close up, the lens barrel actually moves about within the outer shell. This oddly enough doesn't seem to interfere with the functioning of the lens. I sent it back to Sony's Laredo, TX facility for service. After a few days, they called me to say that they couldn't find anything wrong with the lens, and that all functions were within factory spec. I told them that it was working fine but rattled. After a short silence, the technician said again that it was fine and would be shipped back to me. I got it back today, and sure enough, it still works; and still rattles. Now what? Any one have any ideas?

Re: SAL-50M28 Rattles
Posted: Wed Aug 12, 2009 11:18 pm
by David Kilpatrick
It's the aperture coupling which is rattling, almost certainly. Don't worry. Some slack is found in the focusing, but not that much. Just checked my 20+ year old Minolta and it rattles, sure, but the play is much less than say an 18-70mm.
David
Re: SAL-50M28 Rattles
Posted: Thu Aug 13, 2009 8:45 pm
by Dr. Harout
No rattling in mine. Did you buy it new?
Re: SAL-50M28 Rattles
Posted: Fri Aug 14, 2009 2:54 am
by SLUFDRIVER
Yes sir I did. On or about the 29th of May this year. Truth be told, it's more annoying and embarassing than anything. It seems to work fine, but... It may end up on Ebay. Of course who's looking to buy a lens that rattles?
Re: SAL-50M28 Rattles
Posted: Sat Aug 29, 2009 7:58 pm
by SLUFDRIVER
Well, Sony has returned my lens saying that no fault was found. They also threw away all the original packaging I sent it to them in; claim to have recycled it. It still rattles, and at minimum focus, the lens barrel is still loose. I called them on it, and they insist that it is OK for the barrel to have up to 2mm (!) of latteral movement. I went to a Sony Style store and compared it to the display lens. The display lens was much less wobbly ie, hardly felt. They have agreed to 'have another look at it' but no promises.

Re: SAL-50M28 Rattles
Posted: Sat Sep 26, 2009 3:48 am
by SLUFDRIVER
Well, got the lens back from its second sojourn to TX repair center. They say that they disassembled the lens and still found no fault. Funny thing is, now the barrel is tight and the rattle is gone. Most obviously was my imagination

Re: SAL-50M28 Rattles
Posted: Sat Sep 26, 2009 9:15 pm
by Dr. Harout
SLUFDRIVER wrote:Well, got the lens back from its second sojourn to TX repair center. They say that they disassembled the lens and still found no fault. Funny thing is, now the barrel is tight and the rattle is gone. Most obviously was my imagination

They have found the rattlesnake in it and set it free in the nature
Congratulations. I say it's a must have lens. I love it very much.
