Photoclubalpha

For all those waiting to get V4 without risking the unoffical download, Sony Support UK has it up now. And no, it doesn't do anything extra!


windows: http://support.sony-europe.com/dime/dow ... 700_V4_WIN

Mac: http://support.sony-europe.com/dime/dow ... 700_V4_MAC

Philip

As expected it is byte for byte the same as the "unofficial" - or rather mistakenly released - download. They are one and the same

So what do you believe Marc Weir meant when he said "A700 v.4 and more??
Was it IDS 3? Or do they have something else up their sleeves?

Well, too bad IDS 3 is not available for Mac yet.

Cheers Jonathan

Sweet ladies and gentle men of the forum who own one or more A700's,

We who don't own this super equipment are eager to hear what you have to say about this update and see the results in some sample photos if you please...

Counting on you all 'officially' this time..

Thanks in advance,

Yildiz

changes were also made to WB and the DRO system "improvements"

aster wrote:.... eager to hear what you have to say about this update and see the results in some sample photos if you please... Yildiz

Have you seen this thread?

Hi bonneville,

Yes, I read it. I have been following every thread and every opinion A700 owners wanted to share the past two weeks. I'm always here when I get online to hear and read the latest among worthy news that concerned the A700 and the introduction of the A900.

I was hoping for sample photos that are to be created in the near future with the aid of the new update actually and the effects it had on the work flow. If it's not much trouble that is...

Thanks
Yildiz

the 2 FW updates (leaked and now the official) are in fact identical. this isn't a response to Asters post I just finally had a chance to open them in an editor and compare them a few minutes ago and though people would like to know.

Jonathan K wrote:So what do you believe Marc Weir meant when he said "A700 v.4 and more??
Was it IDS 3? Or do they have something else up their sleeves?

Well, too bad IDS 3 is not available for Mac yet.

Cheers Jonathan

IDS 3 is not available for Windows 2000 Pro either (the Install Wizard gives up saying it's incompatible with the OS). Pity because it looks as though the improvements to the DRO in the RAW converter (which can be applied to any Sony RAW file) are a useful upgrade.

Hi, I wonder if some kind soul could post the installation instructions for the firmware.

I managed to get my IT department to download the file for me but all java and activ-X is disabled for us here and so I can't expand the instructions on the sony site to see what they say.

Remembering how it worked for V1->2 and V2->3, I have installed the extracted file onto a compact flash card which also contains some images. I think this will ensure the picture count doesn't get reset for me. If it destroys the pictures, no problem as they're already off the card.

Can anyone tell me what's next?

Thank you!

Insert the card in your camera, switch on with the menu button (the top on the left hand side) pressed while you do so. Then follow the instructions given by the camera. Use fresh battery or mains adaptor, but in fact an 80 per cent or much less battery is perfectly OK, the process only takes abut 2 minutes.

David

Thanks for the swift reply!

Hoping to get a few shots tonight on the top floor of the Gherkin (30 St Mary Axe) at a little soiree I've been invited to and the HDR might be an interesting thing to play with.

David,

This doesn't seem to be working.

100% battery, file in the root of the CF card (I have also tried it in a folder named after the zip file) insert into camera, switch on with menu held down, the camera says it is 'accessing' and then it just drops out into the normal menu screen.

There are still a bunch of images on the card, which as I mentioned above I was using in the hopes of ensuring the pictures didn't reset.

Does anyone know what I am doing wrong, or can they perhaps point me in the direction for doing it right?

Thanks

Use a newly formatted card - no pix on it.

David

Yes, thank you.

I've just done a search on another 'popular forum for Alpha users' and the solution for keeping the frame numbers running is to put your most recently used card back in and take a couple of shots, rather than keep the old stuff on the same card. It's a big card so I assumed that I could get away with it.

Or this:

Take a pic it will be called _DSC0001 or something close to that.
Put the CF card in your computer and rename the file to _DSCxxxx, where xxxx is the the number where you want to start numbering from minus 1. Put the CF card back in your camera and take a picture. And voila, you reset the counter to where you wanted.