Mini big portable Studio ...
Posted: Wed May 04, 2011 4:25 am
In the engineering world, there is a lot of realization who has to be took in picture.
Good example are from the company I'm working for. We are building Custom test station to automated almost any kind of testing for product. Mainly high technology up to very basic. Most of the phone you are using, are tested by some of our product.
So just to probably give some idea to some people out there and at the same time to received comment or amelioration from pro, here is a presentation of my actual setup:
http://www.pbase.com/nadeauf/portable_setup
Some picture of it :
The main challenge for me is to isolate the station in a White environment in most of the time very short place. The test station are most of the time to heavy to be move, so I have to put the white floor in piece around it. This station is a Small one .
SORRY TO HIDE THE SUBJECT, this station is sold to a customer, so this information is confidential.
Everything has to be portable and movable in Subway or small walk from the car.
Lab where the final tweak are done before to ship
View of the final setup (ust the flash on the floor in the front are usually kicking the left side of the back drop).
P.S. We are looking for good engineer searching for new challenge. We have office in Mountain View/California , Atlanta , Hungary, Mexico , Toronto and Montreal. Future office in China very soon. On my team I'm looking for C# dev with experience if possible in Manufacturing and National Instrument Teststand. On other team we need Hardware, electrical, embedded (C++, ...), software (C++, Labview). Feel free to ask me any question about the opportunities.
Frank
Good example are from the company I'm working for. We are building Custom test station to automated almost any kind of testing for product. Mainly high technology up to very basic. Most of the phone you are using, are tested by some of our product.
So just to probably give some idea to some people out there and at the same time to received comment or amelioration from pro, here is a presentation of my actual setup:
http://www.pbase.com/nadeauf/portable_setup
Some picture of it :
The main challenge for me is to isolate the station in a White environment in most of the time very short place. The test station are most of the time to heavy to be move, so I have to put the white floor in piece around it. This station is a Small one .
SORRY TO HIDE THE SUBJECT, this station is sold to a customer, so this information is confidential.
Everything has to be portable and movable in Subway or small walk from the car.
Lab where the final tweak are done before to ship
View of the final setup (ust the flash on the floor in the front are usually kicking the left side of the back drop).
P.S. We are looking for good engineer searching for new challenge. We have office in Mountain View/California , Atlanta , Hungary, Mexico , Toronto and Montreal. Future office in China very soon. On my team I'm looking for C# dev with experience if possible in Manufacturing and National Instrument Teststand. On other team we need Hardware, electrical, embedded (C++, ...), software (C++, Labview). Feel free to ask me any question about the opportunities.
Frank