"I'm going to try this one for sure."
That 's what I said and I did it before sending in the body.
I tried plain iso 3200 (1), iso 6400 +1 stop (2), and iso 6400 +2 stops (3). The last two were pulled back in Sony software with 1 or 2 stops to correct the exposure.
I used the 18-70 to take the pictures as my Tamron also went back to the factory for adjustments. A-mode, F6.3 at 1/50 sec, center weight metering.
I did use a lot of light/dark objects, clothes spread across the room/chair, to get as much noise into the scene given the exposures. I think these pictures do challenge the sensor much more than many of the cat shots presented here.
First the pictures without any NR, straight from raw but cropped in the order mentioned:
1)
http://farm4.static.flickr.com/3058/291 ... 96dc_o.jpg
2)
http://farm4.static.flickr.com/3273/291 ... 89ed_o.jpg
3)
http://farm4.static.flickr.com/3014/291 ... 44cc_o.jpg
Now with a default NR mode in Neat Image, the 'blotchy noise' option in the advanced menu:
1)
http://farm4.static.flickr.com/3288/291 ... f943_o.jpg
2)
http://farm4.static.flickr.com/3023/291 ... 8e96_o.jpg
3)
http://farm4.static.flickr.com/3010/291 ... 8d74_o.jpg
I'm not going to judge the pictures in terms of retained details, as in these conditions the lens is surely a limiting factor compared to e.g. my Tamron. If I look at noise however, the iso 6400+2 stops is the best, followed by the iso 3200. After NR the order is much the same but the differences between the two do become very small.
So it seems to work, but I never get the low noise levels Sonolta is showing us with his A700.
There are two questions I would like to ask you guys. I want to know why more light at a higher sensitivity seems to be more effective than using a lower sensor sensitivity. In fact, it does not seem to work that well with only 1 stop extra, but it does with 2.
Is it because pulling back the exposure hides some noise in the darker scenes but uses the extra light to gain detail against noise ? Or is there a non linear relation between noise and iso going from 1600 to 6400 in the A700 ?
lock