Jettec pigment inks for Epson R1800
-
chorleyjeff
- Initiate
- Posts: 34
- Joined: Sun Jun 10, 2007 5:08 pm
- Location: Lancashire, England
Jettec pigment inks for Epson R1800
Very specific question.
Can anyone offer an opinion about the quality of Jettec pigment inks for use in an R1800? Or advise another good quality 3rd party ink? I tried some Pro-Jet ink and its low price seems to equal low quality.
Epson inks are very high cost bought by the cassette and I don't yet have £300 for a continuous ink system! And continuous systems seem to be 3rd party inks anyhow.
Cheers
Jeff
Can anyone offer an opinion about the quality of Jettec pigment inks for use in an R1800? Or advise another good quality 3rd party ink? I tried some Pro-Jet ink and its low price seems to equal low quality.
Epson inks are very high cost bought by the cassette and I don't yet have £300 for a continuous ink system! And continuous systems seem to be 3rd party inks anyhow.
Cheers
Jeff
-
David Kilpatrick
- Site Admin
- Posts: 5985
- Joined: Sat May 19, 2007 1:14 pm
- Location: Kelso, Scotland
- Contact:
-
chorleyjeff
- Initiate
- Posts: 34
- Joined: Sun Jun 10, 2007 5:08 pm
- Location: Lancashire, England
Got the price from the Nova site. Checked other sites later and a Lyson system is advertised at £200 complete with 125ml bottles of ink which on reflection seems an OK price if they work properly.David Kilpatrick wrote:Jettec inks in our Epson 950 managed to leak and ruin the printer. They are about the best quality third party make, but there is still a big risk. I would stick to Permajet, Lysonic etc. Are you sure that a CIS for R1800 will cost you £300? Seems a lot to me. They are usually £150-200.
David
Cheers
Jeff
-
David Kilpatrick
- Site Admin
- Posts: 5985
- Joined: Sat May 19, 2007 1:14 pm
- Location: Kelso, Scotland
- Contact:
I have the Epson 800. Owing to the cost of the original inks.
I have not used it for a year, I send them down the line to Bonus print to have them printed.
If I had this lysonic system, would the results be has good as the original inks, and I wonder if the cartridges
are now so blocked up that they can't be cleared.
Anyone know the answers?
Thanks.
Ralph.
I have not used it for a year, I send them down the line to Bonus print to have them printed.
If I had this lysonic system, would the results be has good as the original inks, and I wonder if the cartridges
are now so blocked up that they can't be cleared.
Anyone know the answers?
Thanks.
Ralph.
-
David Kilpatrick
- Site Admin
- Posts: 5985
- Joined: Sat May 19, 2007 1:14 pm
- Location: Kelso, Scotland
- Contact:
-
David Kilpatrick
- Site Admin
- Posts: 5985
- Joined: Sat May 19, 2007 1:14 pm
- Location: Kelso, Scotland
- Contact:
Who is online
Users browsing this forum: No registered users and 6 guests