When I neighbor moved few years back he left some of his lenses and camera (Konika) and a Metz 45CT-4 flash. A $10 battery holder on eBay made the flash working. Is there any specific work flow or setting I should be using or just try test shots till I get it right? I have A900, A700 and A100 bodies. The flash seems to be firing using PC sync cord but I am not able to control the flash output. Any advice?
With best regards,
Sury
Metz 45 CT-4 Flash advice
Forum rules
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
- sury
- Subsuming Vortex of Brilliance
- Posts: 5419
- Joined: Sun Jun 17, 2007 6:58 am
- Location: San Jose, California, USA
- Contact:
Metz 45 CT-4 Flash advice
Minimize avoidable sufferings - Sir Karl Popper
- Greg Beetham
- Tower of Babel
- Posts: 6117
- Joined: Sun May 27, 2007 3:25 pm
- Location: Townsville, Qld. Australia
- Contact:
Re: Metz 45 CT-4 Flash advice
You'll probably need to get to know your Metz 45 CT4, because if yqu are going to use it on the A900 it's M mode only of course (you will need an ambient exposure to work from as a baseline), the flash will regulate it's own output via it's own sensor, (of course you will need to match settings on the flash to the settings on the camera), and it's fairly necessary for the subject/subjects to be arranged in a fashion that will allow it to work to it's best, it isn't going to spot regulate the flash output, it will only do an output based on about 25deg. field of view, so if the subject/subjects don't fill the majority of the field (the field as seen by the flash sensor not as seen by whatever lens camera FOV is in effect at the time), it will probably render some exposure anomalies, and that is to be expected. (legendary flash BTW)
It might be best to use an equivalent FOV/focal length lens setting at first, one that has a similar FOV to the flash sensor, so you will be looking at a field of view/composure that the flash is also going to base it's output on.
Greg
It might be best to use an equivalent FOV/focal length lens setting at first, one that has a similar FOV to the flash sensor, so you will be looking at a field of view/composure that the flash is also going to base it's output on.
Greg
- sury
- Subsuming Vortex of Brilliance
- Posts: 5419
- Joined: Sun Jun 17, 2007 6:58 am
- Location: San Jose, California, USA
- Contact:
Re: Metz 45 CT-4 Flash advice
Greg,
Thank you. That is very useful. For the first time I appreciated the significance of fov numbers given for lenses. So looks like the lens is better useful when using a zoom lens than a wide angle lens. I have now some thing to go with and experiment.
Sury
Thank you. That is very useful. For the first time I appreciated the significance of fov numbers given for lenses. So looks like the lens is better useful when using a zoom lens than a wide angle lens. I have now some thing to go with and experiment.
Sury
Minimize avoidable sufferings - Sir Karl Popper
- pakodominguez
- Minister with Portfolio
- Posts: 2306
- Joined: Tue May 22, 2007 5:38 pm
- Location: NYC
- Contact:
Re: Metz 45 CT-4 Flash advice
nothing better than reading the owner's manual:
http://www.metzflash.co.uk/pdffiles/Mec ... igital.pdf
http://www.metzflash.co.uk/pdffiles/Mec ... igital.pdf
Pako
------------
http://www.pakodominguez.photo/blog" onclick="window.open(this.href);return false;
------------
http://www.pakodominguez.photo/blog" onclick="window.open(this.href);return false;
- sury
- Subsuming Vortex of Brilliance
- Posts: 5419
- Joined: Sun Jun 17, 2007 6:58 am
- Location: San Jose, California, USA
- Contact:
Re: Metz 45 CT-4 Flash advice
Pako,
Thank you for the reference. Mine turned out to be Analog Flash. Never the less, I am going to set the flash as suggested in the manual.
With best regards,
Sury
Thank you for the reference. Mine turned out to be Analog Flash. Never the less, I am going to set the flash as suggested in the manual.
With best regards,
Sury
Minimize avoidable sufferings - Sir Karl Popper
- Dusty
- Emperor of a Minor Galaxy
- Posts: 2215
- Joined: Thu Dec 18, 2008 5:04 pm
- Location: Ironton, Missouri, USA
Re: Metz 45 CT-4 Flash advice
Not to be a stickler, but shouldn't this be moved to the Flash section?
Dusty
Dusty
- sury
- Subsuming Vortex of Brilliance
- Posts: 5419
- Joined: Sun Jun 17, 2007 6:58 am
- Location: San Jose, California, USA
- Contact:
Re: Metz 45 CT-4 Flash advice
Mea culpa. I did not go to the bottom of the list and therefore did not see the Flash section. My apologies. Can move the topic or is it something Forum Admin needs to do?
With best regards,
Sury
With best regards,
Sury
Minimize avoidable sufferings - Sir Karl Popper
Who is online
Users browsing this forum: No registered users and 10 guests