Bored at work macro edition 2.0
Forum rules
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Bored at work macro edition 2.0
Here are some pictures of a coronary stent I took today at work. This is used like a scaffolding inside a blocked coronary artery to keep it open. In the old days all they could do to open a vessel was a balloon, basically compressing the plaque against the vessel wall, and stretching it wider. While this was better than nothing, the arteries are elastic and tend to recoil back to their original diameter after ballooning. This tiny metal contraption will keep that from happening. It is directed to the blockage via a .014 inch guide wire that acts as a rail to keep the balloon and stent from, oh say poking through the vessel wall and rupturing it.
These are not too artistic, but I hope everyone finds them interesting none the less. The first photo is the stent crimped upon the balloon for delivery. If you look closely at the clear plastic balloon, you will see the great attention to wrapping it on the catheter, to give it the smallest profile.
The second photo is the balloon expanded balloon inflated to approx 7 ATM or 7x atmospheric presure.
The third is just the stent on its own. Its expanded size is approx 4.5mm x 24mm. This would be for a large artery. All photos are with a700 and 30mm f2.8 SAM. C&C always welcome, John
These are not too artistic, but I hope everyone finds them interesting none the less. The first photo is the stent crimped upon the balloon for delivery. If you look closely at the clear plastic balloon, you will see the great attention to wrapping it on the catheter, to give it the smallest profile.
The second photo is the balloon expanded balloon inflated to approx 7 ATM or 7x atmospheric presure.
The third is just the stent on its own. Its expanded size is approx 4.5mm x 24mm. This would be for a large artery. All photos are with a700 and 30mm f2.8 SAM. C&C always welcome, John
- Attachments
-
- stent on its own edit_resize.jpg
- (175.01 KiB) Downloaded 1098 times
-
- stent inflated edit_resize.jpg
- (249.98 KiB) Downloaded 1098 times
-
- liberte on catheter2 edit_resize.jpg
- (163.79 KiB) Downloaded 1098 times
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
- KevinBarrett
- Emperor of a Minor Galaxy
- Posts: 2449
- Joined: Wed Aug 13, 2008 5:32 pm
- Location: Seattle, Washington, USA
- Contact:
Re: Bored at work macro edition 2.0
Did I miss something? When did you get an a700 or 30mm SAM Macro? Nice shots, by the way...how much did that little baby cost?
Kevin Barrett
-- Photos --
-- Photos --
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Re: Bored at work macro edition 2.0
Do you mean the stent or the Camera? The stent is about $1000.00 The a700 was a little more with the 16-105. I'm thinking about selling that 16-105 for a 2.8 zoom... We'll see. The SAM was a cheap $200. I hope to be doing some more OR shots for the hospital soon, as we are adding more procedures. I missed a craniotomy when I went to South Padre Island. Oh well.
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
- KevinBarrett
- Emperor of a Minor Galaxy
- Posts: 2449
- Joined: Wed Aug 13, 2008 5:32 pm
- Location: Seattle, Washington, USA
- Contact:
Re: Bored at work macro edition 2.0
Oh, the stent was cheaper than I thought! Where did you find an a700 kit, by the way?
Kevin Barrett
-- Photos --
-- Photos --
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Re: Bored at work macro edition 2.0
Amazon.com I verified with Sony that the serial # was a legit US model. They said yes, and that it would be covered. Hopefully I won't have to us it. That is a bare metal stent. If it was a drug-eluting stent (covered with a chemotherapy drug to prevent scar tissue overgrowth) it would be about $2500. John
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
- Greg Beetham
- Tower of Babel
- Posts: 6118
- Joined: Sun May 27, 2007 3:25 pm
- Location: Townsville, Qld. Australia
- Contact:
Re: Bored at work macro edition 2.0
Pretty good macro shots of something only 4mm wide, btw there's no great hurry for the OR shots...take your time.
Greg
Greg
-
david antony
- Viceroy
- Posts: 1213
- Joined: Wed Jun 11, 2008 8:32 pm
- Location: tsawwassen, bc. canada.
Re: Bored at work macro edition 2.0
Fine shots John & very interesting. Thanks for sharing.
- KevinBarrett
- Emperor of a Minor Galaxy
- Posts: 2449
- Joined: Wed Aug 13, 2008 5:32 pm
- Location: Seattle, Washington, USA
- Contact:
Re: Bored at work macro edition 2.0
Congratulations! I know you'll enjoy it (you were always admiring my LCD). So what motivated you to finally up and buy an a700?
Kevin Barrett
-- Photos --
-- Photos --
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Re: Bored at work macro edition 2.0
Greg- I hope to have the OR shots up this weekend.. I took a bunch of photos, and I am trying to cull the herd to the best ones. That's my excuse anyway
Kevin- I pulled the trigger, because the price and the timing were perfect. I know that the replacement will be announced soon, but I figured why wait, and the new one will probably be more expensive... We'll see..... John
Kevin- I pulled the trigger, because the price and the timing were perfect. I know that the replacement will be announced soon, but I figured why wait, and the new one will probably be more expensive... We'll see..... John
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
- Greg Beetham
- Tower of Babel
- Posts: 6118
- Joined: Sun May 27, 2007 3:25 pm
- Location: Townsville, Qld. Australia
- Contact:
Re: Bored at work macro edition 2.0
John I thought A700's were hard or almost impossible too find new now. Sony style here have been 'out of stock' for a long time now. Did you have much trouble finding one.
Greg
Greg
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Re: Bored at work macro edition 2.0
It wasn't hard to find really, I just put in Sony a700 in the search, and it came up. They have a couple new ones listed today... John
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
Re: Bored at work macro edition 2.0
Very interesting John - I think I like the shots of the equipment before it gets err... messy
The metals links are amazing - I wonder how they manufacture something like that?
EDIT: P.S. I noticed that I have made it to Emperor! Whoa
! A long way to Vortex, but I guess I have a Galaxy to sort out first
.
The metals links are amazing - I wonder how they manufacture something like that?
EDIT: P.S. I noticed that I have made it to Emperor! Whoa
Nex 5, Nex 6 (IR), A7M2, A99 and a bunch of lenses.
- Dusty
- Emperor of a Minor Galaxy
- Posts: 2215
- Joined: Thu Dec 18, 2008 5:04 pm
- Location: Ironton, Missouri, USA
Re: Bored at work macro edition 2.0
Congratulations, Your Imperial Highness!Birma wrote: EDIT: P.S. I noticed that I have made it to Emperor! Whoa! A long way to Vortex, but I guess I have a Galaxy to sort out first
.
Your humble servants hope that your reign is an enlightened one.
Dusty
- Dr. Harout
- Subsuming Vortex of Brilliance
- Posts: 5662
- Joined: Wed May 30, 2007 7:38 pm
- Location: Yerevan, Armenia
- Contact:
Re: Bored at work macro edition 2.0
Birma wrote:EDIT: P.S. I noticed that I have made it to Emperor! Whoa! A long way to Vortex, but I guess I have a Galaxy to sort out first
.
- Juanito200
- Viceroy
- Posts: 894
- Joined: Sat Jul 25, 2009 9:26 pm
- Location: McKinney, TX
Re: Bored at work macro edition 2.0
Darnit......Just when I thought I was pretty hot stuff for being a Grand Caliph....Congrats Emperor Birma Bokehus the First!
If the last thing you remember hearing is somebody yelling 'CLEAR!!!', assume you've had a problem!!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
a77, a700, a200, Minolta 8000i, NEX C3, NEX 5N and more lenses than my wife suspects!
Who is online
Users browsing this forum: No registered users and 52 guests