The subject is the sharpness of CZ 24-70mm f/2.8 lens.
My concern is the sharpness on the edges of the picture at focal length 70mm.
My first case is a lens I purchased. I tried it out at 70mm F/2.8 on Sony’s A700.
The lens was not sharp at all on the edges. I returned the lens.
My second case is this picture:
http://a.img-dpreview.com/gallery/sony_ ... 990_dw.jpg
Sony Alpha 900 Preview Sample, 70 mm, ISO 200, 1/640 sec, F8.0, +0.0 EV, Sony 24-70mm f2.8 ZA
The blue and white handrails on the external sides of the towers are not sharp.
The picture must be reduced to a 5”x7” size to get a rather consistent image.
The picture was shot at a rather ideal F8.0 opening!
Can these poor performances of two random lens samples be explained by “bad luck”?
Carl Zeiss 24-70 2.8
Forum rules
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
No more than three images or three external links allowed in any post or reply. Please trim quotations and do not include images in quotes unless essential.
-
David Kilpatrick
- Site Admin
- Posts: 5985
- Joined: Sat May 19, 2007 1:14 pm
- Location: Kelso, Scotland
- Contact:
Re: Carl Zeiss 24-70 2.8
The samples like pretty normal to me for a JPEG. Some residual CA, plus the JPEG effects, can produce this sort of result. I would test using raw and correcting CA in a good converter like DxO, C1 Pro or ACR/Lightroom. I find that all lenses - even the best like Nikon's 24-70mm f2.8 - need some correction for perfect results.
David
David
Who is online
Users browsing this forum: No registered users and 12 guests